MCD 5.0 Manual licenses

[mitelsx2k]

Hi I have downloaded the licenses for a new install, but i have been given a zip file which which contains the license key, anyone know how you get the password from this, as i have been unable to open itso far, thanks

ps The site does not have an internet connection so unable to do a sysnc with the AMC

 

[wireman50]

I think you can't do it manually any more, it has to be done via the config wizard using this method.

If the Configuration Wizard is unable to connect to the AMC to license a system, it will save the License and Options configuration to a batch file. For systems with license sharing that were provisioned using the wizard, a second batch file is made that contains the Group Application Record ID A value obtained from the Mitel Application Management Center (AMC). Used to license software on two or more MCD systems that are grouped into a single entity on the AMC for licensing purposes.. The location of the files is given in the Results page. Run the file(s) from a PC with internet connectivity to retrieve the license keys from the AMC and complete the upgrade.

Note: Offline Licensing through the Configuration Wizard is not supported on the MXe Server, the MCD-ISS, and vMCD. These platforms are licensed through MSL.

To license a 3300 ICP while disconnected from the AMC:

Copy the \AMC\... folder(s) and its contents from the location indicated in the message box to a PC with internet connectivity.

Run the "retrvlic.bat" file either by double-clicking it from Windows Explorer or using the Windows Command Prompt (click Start > Programs > Accessories > Command Prompt).

Copy the \AMC\...folder(s) and its contents from the AMC-connected PC to a PC on the 3300 ICP network, replacing any existing AMC folder.

Relaunch the Configuration Wizard and navigate to the License and Options screen.

Click Yes.

Wait while the 3300 ICP applies the remaining wizard configuration data.

Assuming V5 software.