MCD 5.0 LS Trunks 4 times before ringing starts in MCD? 2

[zete]

In an MCD 5.0 I have 5 loop start trunks and when I dial in to one of the trunks, it appears the trunk actually rings 4 times before the ringing actually starts in the MCD 5.0 ring group members.
What causes the Loop Start trunk to ring like it should using a butt set, but take 4 rings for the MCD to ring the ring group the first time.

 

[EPearson]

What happens when you dial the hunt group access code...just making sure that rings proper...could be class of service on Hunt group. just a thought

 

[sarond]

This may help you

http://www.tek-tips.com/viewthread.cfm?qid=1668307

 

[kwbMitel]

Assuming that all trunks are programmed the same and that only 1 is not ringing correctly (that how your post reads to me) I would surmise that you have them programmed a CLASS trunks and that 1 trunk is not providing caller ID.

If all trunks are delayed (alternate interpretation), turn off ANI/DNIS trunk option is COS of the trunk.

**********************************************
What's most important is that you realise ... There is no spoon.

 

[zete]

kwbMitel was right on the money. I hope the many many COS Options that Mitel uses will get easier to understand with the intro of grouping COSs options in MCD 5.0.
It seems there are soooooooooooo many "Mitel Secret" Solutions that more and longer wait and hold times for "tech support/Mitel" would improve if MOL was structured to truly "search" issues with fixes.
Thank goodness for techs like kwbMitel. I spent over 3 hours searching for solutions to this issue before kwbMitel came along!!!

 

[kwbMitel]

**********************************************
What's most important is that you realise ... There is no spoon.