Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MC32s

Status
Not open for further replies.

lliesbthighs

Vendor
Jun 29, 2008
152
Hi, i got new MC32s card and it got booted to IPL prompt and IPInfoShow shows no IP configuration, A sig server is already working a Leader and i need to configure MC32s as follower, how do i start programme follower and ELAN ,CLAN IP from IPL prompt
Regards
 
You don't. Add cards to the node in element manager. Transfer the node properties and reboot the card, this sets the IP address. Transfer the node properties again because it will fail the first time.

Signature===========================================

 
Also depending on your software release you will have to get the latest for the MC32s card from Nortel and push that using signaling server also.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top