iamstressd
Technical User
What is the command to view the firmware version of an MC32 card?
Thanks
Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
MC32 Firmware/Software Version?
- Thread starter iamstressd
- Start date
- Status
Firebird Scrambler
Programmer
I've found a few old commands below.
=== General_Purpose Commands ===
ping Send ICMP echo request(s) to another host
firmwareVersionShow Prints out firmware version number
IPInfoShow Prints IP information
itgCardShow Show card info
itgChanStateShow Show State fo channels, eg. busy or idle
itgMemShow Show the memory usage
Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support
=== General_Purpose Commands ===
ping Send ICMP echo request(s) to another host
firmwareVersionShow Prints out firmware version number
IPInfoShow Prints IP information
itgCardShow Show card info
itgChanStateShow Show State fo channels, eg. busy or idle
itgMemShow Show the memory usage
Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question