We attemptto receive a sip trunks with an MBG as SIP Proxy
I know we need the next info to set the sip trunks in MBG
Remote Trunk endpoint address: The public IP address of the provider’s switch or gateway this address should be given to you by the provider
The port to use: UDP 5060
Authentication - User name and password provided
We receive the follow info from SIP carrier
Dear Sirs
Our connection is peer to peers. It is no user name and password.
Please send the public IP of the PBX for acceptance into our network.
regarding the IP which must authorize his side would be:
Pinging only access 65.12.162.44
Access trunk full 38.101.199.74 1
Access trunk full 38.101.199.75 2
Access full support 201.197.125.26 (OPTIONAL)
2 Trunk info.
disallow = all
allow = ulaw
type = friend
nat = yes
insecure = very
host = 38.101.199.74
dtmfmode = rfc2833
canreinvite = no
qualify = yes
disallow = all
allow = ulaw
type = friend
nat = yes
insecure = very
host = 38.101.199.75
dtmfmode = rfc2833
canreinvite = no
qualify = yes
It is posible to set in the MBG a kind of csip conection like this? Peer to Peer
Thanks
I know we need the next info to set the sip trunks in MBG
Remote Trunk endpoint address: The public IP address of the provider’s switch or gateway this address should be given to you by the provider
The port to use: UDP 5060
Authentication - User name and password provided
We receive the follow info from SIP carrier
Dear Sirs
Our connection is peer to peers. It is no user name and password.
Please send the public IP of the PBX for acceptance into our network.
regarding the IP which must authorize his side would be:
Pinging only access 65.12.162.44
Access trunk full 38.101.199.74 1
Access trunk full 38.101.199.75 2
Access full support 201.197.125.26 (OPTIONAL)
2 Trunk info.
disallow = all
allow = ulaw
type = friend
nat = yes
insecure = very
host = 38.101.199.74
dtmfmode = rfc2833
canreinvite = no
qualify = yes
disallow = all
allow = ulaw
type = friend
nat = yes
insecure = very
host = 38.101.199.75
dtmfmode = rfc2833
canreinvite = no
qualify = yes
It is posible to set in the MBG a kind of csip conection like this? Peer to Peer
Thanks