MBG on Hyper-V

[Tinos]

Hi all.

Requesting for some tips. I would like to deploying MBG on Hyper-V in server gateway mode. The host has 4 physical NICs.
My challenge is on how to map eth0 of MBG blade to vSwitch1 to physical NIC1 which is LAN side and eth1 of MBG blade to vSwitch2 to physical NIC2 which is WAN side.
I have entered MAC addresses of the MBG eth0 and 1 as static on the vSwitches and its not working for the WAN side but for the LAN its fine. Please advise.
Thank you.

 

[Billz66]

Its a hyper v issue not Mitel

we have some where the NIC's are directly connected to a physical interface
and some where they have VLAN tagging and are trunked to the switching and conencted via that

If I never did anything I'd never done before , I'd never do anything.....

 

[Tinos]

Hi all.
Has anyone had vMBG WAN interface working on Hyper-V? Please share your configs advise for the vSwitch to connect.

 

[Lundah]

I've got a MiCollab sitting on a HyperV host with the same problem. Did you find a solution to this?

 

[Tinos]

I didn't manage to get a solution. Ended up changing my deployment mode from Server Gateway to DMZ.