Geordie12567
Technical User
Is there a way to determine maximum concurrent calls you can have on a SIP trunk? I checked in CUCM and Cube but do not see anything governing this.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Maximum concurrent calls on a SIP trunk with CUCM and Cube
- Thread starter Geordie12567
- Start date
- Status
gnrslash4life
MIS
Itll be controlled by your telco, then technically by your licensing. So easiest thing to do is ask your telco what its set for to start with.
Certifications:
A+
Network+
CCENT
CCNA Voice
CCNP Voice
Certifications:
A+
Network+
CCENT
CCNA Voice
CCNP Voice
biglebowski
Technical User
Depends on the model but it's up to 16,000 sessions for the largest ASR based CUBE, that's a few years old as I haven't had anything to do with CUCM/CUBE for a few years now.
The limiting factor (beyond licencing) is the hardware or hypervisor hardware.
Biglebowskis Razor - with all things being equal if you still can't find the answer have a shave and go down the pub.
The limiting factor (beyond licencing) is the hardware or hypervisor hardware.
Biglebowskis Razor - with all things being equal if you still can't find the answer have a shave and go down the pub.
- Status
Similar threads
- Locked
- Question
- Question
- Question