MAXIMUM 0X16 MODULES ON 0X32

[iwant750]

I HAVE A MICS WITH 2 PRI, 2 6 PORT FIBER EXPANSION, 9 0X16 MODULES, AND 1 ANALOG STATION MODULE. I RECENTLY ATTACHED 2 MORE 0X16S TO THE PORTS 13 AND 14 OF THE EXPANSION CARD. THE PROBLEM IS THAT THE MODULES DONT SEEM TO INITIALIZE, IF A HANDSET IS ATTACHED IT JUST FLASHES BUT IT NEVER COMES UP. CHECKED IN HARDWARE AND THEY ARE NOT DISABLED. ANY IDEAS? THANKS IN ADVANCE

 

[Dasheen]

Port 13 & 14 are only for Companion on s/w lower than 7.0.

 

[curlycord]

You need 7.1 XC software for those 2 ports to open up, for earleir releases they were reserverd for companions.


=----(((((((((()----=
curlycord

http://www.curlycord.com