davidwalters
IS-IT--Management
Does anyone know what the maximum number of DID target lines a MICS can be programmed for using a single 23 channel PRI?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Max number of DID target lines
- Thread starter davidwalters
- Start date
- Status
deadringer22004
Vendor
I believe it is 128 target lines on the system.
- Thread starter
- #3
davidwalters
IS-IT--Management
Is is possible to get any more than 128? I have a call center that uses hand outs and does a lot of different ads and uses a lot of different people and calls from other cities via toll free numbers and stand alone voice mail boxes that need to be able to route more DID numbers onto the system. Is there any type f expansion software or hardware or how about networking two MICS together they already have a lot invested int this MICS between the PRI, handsets and voice mail. They are looking to get about 300 to 500 DID on the system?
- Status
Similar threads
- Question