Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MAX DN length on a BCM 2

Status
Not open for further replies.

atascoman

Technical User
Oct 10, 2003
868
US
What is the maximum length the DNs can be. I am being asked to implement one with 7 digit DNs and can't find in the documentation if this length is supported. Is there a differnence if it's a BCM50 vs. BCM400?
 
Can I ask why would any one want to dial 7 digits for a DN?




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
common numbering plan ...
2-3 digit location ID and rest for 'extension numbers'

on a small system it probably makes sense with a lot of locations
 
Because they have 2 entire NXX to distribute amongst all their locations and rather than have to deal with end user confusion they opted to have the extensions be 7 digits across the board is possible.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top