Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Max configuration on a BCM50
- Thread starter Runako
- Start date
countrytime
Vendor
No - On the BCM50 rls.2, you can have an additional 32 IP sets.
BCM50 can have 2 expansions, to max out you can have
1 T1 on one expansion , DSM 32 on the second
4 co on base unit, 12 digital on base and
32 IPs set on software license
so total 24 lines/channel ( 23 if IDSN ), 44 digital and 32 ip sets in theory but yet to see any one that are running with this max out config so don't know if it is stable or not .
In real life, I have 25 lines ( ISDN + 2 co ) , 6 digitals and 32 IP sets in ACD and it run ok with 1200 calls average / day without much trouble on version 1 ( with most recent patches ).
This config was intially against SBC engineering recommendation but we went ahead anyway instead of going with a BCM400
1 T1 on one expansion , DSM 32 on the second
4 co on base unit, 12 digital on base and
32 IPs set on software license
so total 24 lines/channel ( 23 if IDSN ), 44 digital and 32 ip sets in theory but yet to see any one that are running with this max out config so don't know if it is stable or not .
In real life, I have 25 lines ( ISDN + 2 co ) , 6 digitals and 32 IP sets in ACD and it run ok with 1200 calls average / day without much trouble on version 1 ( with most recent patches ).
This config was intially against SBC engineering recommendation but we went ahead anyway instead of going with a BCM400
- Status
Similar threads
- Locked
- Question
- Locked
- Question