matrox millenium g400 and ati all in wonder 7500.....

[Kingkeyan]

I own a matrox g400 and I want to get an ati radeon alli in wonder 7500 because of its tv capabilities, can i use both on my computer at the same time or do i have to take one out and use only one, if i can use both at the same time it would be great if not is there a way where i can choose on the startup screen as to which one i can start with? im running a p3 800mhz comp with 256 mb of ram and a partitioned 20 gb hard drive one half NT the other is 98

thanks

 

[chaosinc]

if you use the 7500 card with the tv out, that is the only card you should have to have, as you will be able to choose between the outputs on the one card. of course if you are dead set on using both cards then you could select the card you use through the display adapter settings on the desktop, or you could create another hardware profile from the controll pannel and that would allow you to choose at boot up as to wich hardward configuration you will use.
hope that didn't confuse you .