Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MAT003

Status
Not open for further replies.

NTOldTimer

Programmer
Jun 26, 2003
243
US
When typing WHO at the > I see 8 of these:
ADMIN1 132.168.215.33 (ip address changed for security)

How do you force these out?

Thanks


 
You may need to bounce you ELAN link. This appars to be IP connections from a MAT or OTM server that did not fully release. They are not logged in, but have an existing IP connection to the PBX. Your other option might be to reboot the MAT/OTM server.

Hope this helps,

Scott M.
 
had a recent post on that and the user had to reboot the switch to clear that ip connection.. bad news was she had all her vertiual tty's tied up to ip's and could use otm until she rebooted the switch, in that case booting the server did not clear the tty

john poole
bellsouth business
columbia,sc
 
Nortel has a patch to fix this but u will need to reload the switch
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top