MAT003 - Too Many Sessions

[SL1M1]

Guys, I am having problems using 'Terminal Session' over a LAN (Cisco) connectivity.

Everything else seems to be OK with OTM, other than CorpDir
(Given Up)and this problem which seems to be session's are still open on local and remote PTY's, hence the MAT003 message being generated when trying to connect via OTM?

I am assuming I can't FORC xx a PTY or am I wrong?
Or because there are no Patches loaded on the OTM is it a case of INI on all switches or attain and load appropriate patches onto OTM ?

Your help is appreciated as always as I am tempted to log with Nortel?


Cheers!!

 

[dlesap]

Give print of LD 37 STAT
You may have rls 4.0 If so, INI your PBX, install patch MPLR20109 and ini again

 

[SL1M1]

Thanks dlesap,

I have upto date PEP's (11) but can't see this one, may have to download from the Library ?

Indeed I am running REL 4 on all PABX's seems a bit drastic I though it may have been OTM Patch ?

As requested though herewith the details:-

TTY 0 : ENBL
TTY 1 : ENBL
TTY 2 : ENBL
TTY 3 : ENBL DES: OTM
TTY 4 : ENBL DES: CORE0
TTY 5 : ENBL DES: Core1
TTY 14 : DSBL DES: OTM
TTY 15 : DSBL DES: OTM
.****
OVL000
>WHO
PORT ID OVERLAY NAME SPRT MONITOR
TTY 04 0 ADMIN2

MAT USER NAME IP ADDRESS
ADMIN2 204.54.1.10
ADMIN2 204.54.1.10
ADMIN2 204.54.1.10
ADMIN2 204.54.1.10
ADMIN2 204.54.1.10
ADMIN2 204.54.1.10
ADMIN2 204.54.1.10
ADMIN2 204.54.1.10

Cheers!!

 

[dlesap]

Yes, MPLR20109 is not included in any deplist. Download it from the third menu in PEP library.

Your problem is exactly the one you described...!!! Patch it !!!

 

[SL1M1]

OK dlesap Many Thanks!!