MS 2003. I have inserted 4 sub projects into a master project. The "Project Information" dialog box contains, of course, the information from the master. Is there any way in the master to show or create the project information data that was created for the individual sub projects? This data is important to distinguish certain project types, names, etc.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Master/Sub Projects
- Thread starter homerj56
- Start date
JulieInMaine
Technical User
Hello,
If you double click on the inserted project to show the Inserted Project Information dialog, you can add notes to the summary level line for each project.
However, if you created a master routinely, you'll need to repeat the process for each master you create.
I hope this helps.
Julie
If you double click on the inserted project to show the Inserted Project Information dialog, you can add notes to the summary level line for each project.
However, if you created a master routinely, you'll need to repeat the process for each master you create.
I hope this helps.
Julie
- Status
Similar threads
- Locked
- Question
- Locked
- Question