MAS LinkHandler 1

[matatan]

I'm getting this message from SCCS from the event viewer, and there is not documentation on Microsoft site. Does this make sense to some body?.


Event from NT System Log(Service Control Manager), Event: ID=7031, Description: The MAS LinkHandler Port #2 service terminated unexpectedly. It has done this 514 time(s). The following corrective action will be taken in 0 milliseconds: No action. .

 

[luv2ski]

first i would make sure youy are up to date for all peps and switch patches then go from there.

here are a list of the most up to date pep numbers we have... server peps for 4.02.06

NS040206SU09S
NS040206G011S
NS040206G004
N104020U010s
*****************************
client peps for 4.0/4.2

NS040107SU10C
SU09C
G002C
G008C
G009C
G010C
G012C
NS040107G013C

Pat Guido
NEXTIRAONE
Pat.guido@nextiraone.com

Formerly Nextira, formerly Williams Communications, formerly Wiltel, formerly Nortel networks, formerly Northern Telecom, formerly, Nynex meridian systems formerly Northern Telecom.

 

[sandyml]

Are you using the ACCESS link to Meridian Mail? If not, you will get this message, since there will not be a connection from COM2 on the SCCS to Meridian Mail. If in fact you are NOT using this feature, go into Services on the SCCS and disable the MAS LinkHandler Port #2 service (and stop it if it is started).
If you ARE using Meridian Mail ACCESS, it's not working...

 

[matatan]

Thanks, I'm still wating for the vendor with the new pachts install but seems to be a long wait... Mean while I'll try to disable the port, thanks luv2sky and sandyml.

 

[sandyml]

Good luck. By the way, if you are not using the ACCESS link (serial connection on COM 2), then keep that MAS Link Handler #2 service disabled. I have seen a few cases where it generated so many errors that it locked up the server or caused other problems.

 

[matatan]

I'm pretty sure you're right, maybe that's what is causing the TFE service related to scripts stop all the time, I'll check the behavior in the following days.

 

[matatan]

Perfect, my SCCS seems to be working pretty fine now afther a couple of weeks, I disabled the port and that's it.

Thanks!