MAS 1.2 UR1 - Additional WAN IP address field

[cknipe]

I have been trying to get awc working but am having trouble with the firewall portion of this. I have a couple questions that hopefully someone will be able to chime in with.......

If you look in the AWC config and maintenance manual. They show an example of the serverbeing setup with 2 DNS names:
awc-1.domain.com and awc-2.domain.com . Both names resolve to the awc server. What I am having a hard time figuring out is how is awc aware of both names when there is only 1 field to name the awc server?

With regards to the 2 public IP addresses being used...If the server is in server-gateway mode, can one of the public IP addresses be wan IP of the server-gateway server

Also in MAS 1.2UR1 there is a new server config option to add an additional IP address to the server from your ISP. Is this setting for AWC?

 

[kwbMitel]

I have not yet had the pleasure of working with an AWC.

That being said, I think I can still answer your question regarding the addl. WAN setting.

14.(New) Select additional static IP address:As stated, if your ISP has allocated an additional IP address for your WAN connection, you may enter it here. Again, consult your application release notes and documentation for further information on this usage. Typically this field is left blank and is only relevant if the server is setup in LAN WAN mode (aka server gateway). If required, this display is followed by a display asking for the Subnet mask (not shown).

*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.