I had 2 sets an I2004 and a 3904. I built the I2004 first then the 3904. The I2004 was not working and the 3904 would not forward til I deleted the I2004. Is marp causing this and is there a way to assign the 3904 as the mail or how do you control the forwarding on a MARP set.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
MARP question
- Thread starter TETech
- Start date
MARP, Stands for Multi Appearance Ring Prime. This means that the phone with the MARP will control the forwarding on No Answer. Usually the first phone that is created with an appearence of a DN will take the MARP. If you wish a later phone to be the MARP, you will need to answer YES to the MARP prompt when creating the DN.
when you build a second set.. answer the marp prompt yes or take the default (no).. the station with the marp controls forward.. be sure marp is on...
john poole
bellsouth business
columbia,sc
Code:
REQ CHG
TYPE 500
TN 20 1 14 14
ECHG yep
ITEM dn 4940
MIX HNT FNA
MARP ON TN 056 0 14 14
MARP yesjohn poole
bellsouth business
columbia,sc
- Status
Similar threads
- Locked
- Question