The NAS device never shows up when I browse to map a drive on any of my workstations. I just have to type the NAS ID in from memory. This is not that big of a deal, but was just wondering if anything I could do to have it show up when I browse to map a drive?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Maping NAS as a network drive
- Thread starter novakpsu
- Start date
The problem might be WINS. How big is your network? Are you in a domain? Do you have a WINS Server? I would say that having a WINS server you most likely help. This does not mean that you need to go buy a server just to be a WINS server. If you have NT,Win2K+ server, then it could be the wins server. If you are using SAMBA PDC, or a SAMBA File Server, then it could be the WINS server.
>---------------------------------------Lawrence Feldman
SR. QA. Engineer SNAP Appliance
lfeldman@snapappliance.com
>---------------------------------------Lawrence Feldman
SR. QA. Engineer SNAP Appliance
lfeldman@snapappliance.com
- Status
