Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Map Page General (Feature 6 0) to extension

Status
Not open for further replies.

cwozniak

IS-IT--Management
Aug 5, 2016
2
US
Hi,

Is it possible to map a feature to an extension? I am trying to make it so in case of a lockdown or something else, people don't have to remember Feature 6 0 Both All and instead can dial ext 1999 and it will do the same thing.

Thanks
 
You cannot tell a DN it will be a feature instead of a station.

You can program a button on a phone or use a shorter code as explained here in the FAQ's

In your case you probably just want to program Feature 631 to a button (or write over an existing page button) or just use that feature from now on if low on buttons.

Feature 631:
6 says page
3 says both sets and speaker
1 says Zone 1


________________________________________
small-logo-sig.png


=----(((((((((()----=
Toronto, Canada

Add me to LinkedIN
 
Thank you! I thought that might be the only option
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top