Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
manually programming nortel 2004 ip phones on a bcm
- Thread starter chino888
- Start date
Deweyhumbolt
Technical User
If you can get in to program mode, what's the question? You enter the parameters it asks, IP address of tel, IP address of BCM, IP address of Gateway, or DHCP Y/N.
There is a BCM thread.
There is a BCM thread.
acewarlock
Technical User
Use the BCM Forum
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
- Status
Similar threads
- Locked
- Question
