is there any tutorials around on manually compiling a program? typosoft has talked about it, and i don't have the time or patience to find it right now (i'm restricted to the ol' p 120) if anyone has any tut's around or know of any on the net, it'd be a big help. thx!!!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
manual compilation
- Thread starter Barok
- Start date
There are examples of how to do it around, but you might
check your local library for a QuickBasic manual (4.x or
above). there's been lots of books written on QuickBasic
too so, you should find some good help on that there.
I built a compiler aid that should be available on my
web site. I built it so that I could compile a group of
programs at one time using a bat file.
You might get some insight on manually compiling, by looking at the code.
the web site is:
(on the files page). (the frames version of the site is faster loading).
check your local library for a QuickBasic manual (4.x or
above). there's been lots of books written on QuickBasic
too so, you should find some good help on that there.
I built a compiler aid that should be available on my
web site. I built it so that I could compile a group of
programs at one time using a bat file.
You might get some insight on manually compiling, by looking at the code.
the web site is:
(on the files page). (the frames version of the site is faster loading).
- Status
