Guest_imported
New member
- Jan 1, 1970
- 0
Hi folks...
Where could I find a good or useful Manual about CR 4.6 and its scripting language?
thanx
Where could I find a good or useful Manual about CR 4.6 and its scripting language?
thanx
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Manual about CR 4.6 and language
- Thread starter Guest_imported
- Start date
- Status
Are you talking about the VB commands that control the report via OCX? There is some info on the web site, and several books out that you can buy, including my own listed below. Most will focus on current versions, but the OCX hasn't changed much in terms of the basic commands. The most detailed book is probably the George Peck: "Complete Reference to CR." Ken Hamady
Crystal Reports Training/Consulting and a
Quick Reference Guide to VB/Crystal (including ADO)
Crystal Reports Training/Consulting and a
Quick Reference Guide to VB/Crystal (including ADO)
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question