Manage Router Through ASA

[mattrgee]

Hi all,

I'm working with an ASA 5505 and have the following scenario

Inside > ASA > Router > Internet
192.168.0.0/24 192.168.0.72 86.50.149.50
86.50.149.51

I would like to manage the router from the inside network, ideally like this: 192.168.0.72:8000 i.e. the inside int ip of the ASA and the port 8000 within a web browser.

I'm working within the ASDM.

Any help greatly appreciated.

 

[unclerico]

all traffic is allowed outbound by default so if you haven't created any ACL's and applied them inbound on the inside interface or outbound on the outside interface then you should be able to get to the router without issue. if, on the other hand, you have created an ACL and applied it then you'll need to open the port.

I hate all Uppercase... I don't want my groups to seem angry at me all the time! =)
- ColdFlame (vbscript forum)