making the station number visable for the called person

[amateurope]

We are using an pbx G3csi8 version 02.0.034.5

If someone calls and outsite number the number in te remote display is the reception number of the local office.
We want change this to the calling station number.

Does any one has a clue how to do this .

Regards,

Arno

 

[assistu]

You can only really do this with ISDN PRIs and it's in the "cha isdn pub" screen.

 

[amateurope]

Asistu,

I have chan the trunk on page 2 "send caling number to yes " I filled in the cha isdn pub.
Ext Ext   Trk     CPN         Total CPN 
Len Code  Grp(s)  Prefix       
4 80 1 04769280 10
4 86 1 04769286 10

The trunk we are using is an isdn 30 chan line.
So after this i though i would see 0476928013 in my display if someone was calling me from ext 8013. But it is still showing the main number.
In the dial plan i saw 8 is misc and second digit 0 is a ext and 6 is an ext both with a lenghts 4.
This looks fine to me.
So any sugestions

Regards,

Arno

 

[DirkBe]

Hi Arno,
Please check the second page on your your station 8013, "send calling number" must be Y or blank.
Second option : is your provider (of trunk) aware that your are sending your number, perhaps they are doing an override with the main number on your trunk.
Best regards.
Dirk
Fortis AG Belgium


02/220.19.37

 

[MauroB]

Hi ,
You have to change isdn public and fill extension statrt number , extension lenght ,the local office reception number and the total lenght .
Try it !