Making a phone unrestricted...

[recodito]

I have a meridian 1 release 25 and i wan to know how to make a analog extension unrestricted, follow example:

extension 442->dial "9"->pstn

Thanks

 

[johnpoole]

not sure about your example, in ld 20
prt
dnb
that will give you the tnb
in ld 10
chg
500
tn (x x x x)
echg=yes
ncos= 3 or higher, depends on your switch
cls unr



john poole
bellsouth business
columbia,sc

 

[recodito]

And then i can dial "9" without password?
Thanks

 

[johnpoole]

the auth code is tied to your ncos, change it up one digit at a time until you find the right one. or print a phone that don't need it. the auth code block changes the ncos of a set to allow it to call out, print your auth codes is ld 88 or do it by trial and error.. yes ncos is how you bypass authcodes

john poole
bellsouth business
columbia,sc

 

[recodito]

Thanks johnpoole...

 

[recodito]

it leaves this: "item

 

[johnpoole]

enter two more times to finish the change

john poole
bellsouth business
columbia,sc

 

[recodito]

in "item" word what instruction I must write?

 

[davbar]

just hit enter two more times, without typing any commands.

David.

 

[johnpoole]

the item prompt is in case you want to change another line.. ie item=hunt 3301 item= cls hta..and no you don't use = in the switch

john poole
bellsouth business
columbia,sc