Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Make calls from BCM 450 to BCM 400

Status
Not open for further replies.

Bonker1974

Technical User
Oct 11, 2011
359
BS
Hi
I have 2 BCM 1 at the head office and one at the remote office connected via H323 trunks, BCM450 have a PRI. What we are trying to do is allow users on the BCM400 to use the PRI on the 450 to make calls.

This what I have done so far.
BCM 400
Destination Code 9 is going to the H323 trunks,
I am sending the 9 to the H323 trunks

Routing Table
9 is going to the BCM450 IP address

Remote Package 5
Has the H323 trunks


BCM450
Remote package
Has the H323 trunks & PRI


am i missing something?




 
Need more info to get you the answers you need.

1. What are the exts. on the 450?
2. How do you can from site to site?
3. Is this set-up as CDP or UDP?
4. What are the software versions of the BCM's?

If you have never done this before it can be kinda tricky. I know my first few weren't super fun. These systems are able to dial each other right?

Jeremy J. Carter
Charm City Communications
Norstar. BCM. CS1000 Programmer
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top