Make additional phones ring CIS 4.1 1

[bq]

I have recently taken over the tel comm admin duties for a Nortel CIS system running 4.1. I have already done my adds moves and changes. Renaming extentions ect. Now I need to make two existing extentions ring when the incoming co's ring. I can not find the command path for this ez mod. Please help!_BQ

 

[mroberts]

Feature * * 266344, Password: 266344
Terminals&Sets - Press the upper right button that lit up on your phone.
Show set: ___ - Enter the extension number you want to have ring with incoming calls.
223:223 - Press the upper right button again.
Line access - Upper right button
Line assignment - Upper right
Show line: ___ - dial in the line number you want to have appear and ring on the phone. Remember line 5 is actually 025, line 6 is 026, line 7 is 027, line 8 is 028.....
L001: Unassigned - Press the change button thats in your display until it says appear & ring. Or if you do not want to give them the actual line buttons you can choose ring only and the calls will come in on their intercom buttons. MRoberts
mroberts@americaii.com
If you find a tip helpful, please mark it as such.

 

[bq]

Thanks in advance for the quick reply! I'm heading out the door with your info in hand. BQ