Maintenance Commands NEAX 2000 IPS

[parkland]

New to NEC. Have NEAX 2000 IPS. Need to find out some useful daily maintenance commands to monitor PRI status, calls, etc remotely. Thanks for your help.

 

[OzzieGeorge]

Sorry

No such commands!

 

[belevedere]

There is an option to have the system send alarms to an external device, or to SNMP if you are connected to a network.

 

[OzzieGeorge]

But it won't let you monitor calls or even how many channels are currently in use. Only if there is a problem!

 

[peporter]

As Ozzie said, nothing to monitor ISDN service, but you do have a few commands

EA0 DE 00 - will list all alarms that the system shows and a description. This is where you can look to see if your digital lines (ISDN) had outages or errors. Any other issue the system has you can see it here also.

Command
- EA1 DE 00 - Clear all MJ/MN alarms
- EA1 DE 01 - Clear MJ alarms
- EA1 DE 02 - Clear MN alarms

Phillip E. Porter
Senior Systems Engineer
Telecommunication Solutions Group, Inc. (TSG)

 

[peporter]

You should get a copy of the command manual and look at command EA and see all the other stuff there is for Mainteance and Alarm information. Their are several in the EA command. I just mentioned EA0 and EA1.

Phillip E. Porter
Senior Systems Engineer
Telecommunication Solutions Group, Inc. (TSG)

 

[parkland]

Thanks to all for the info.

 

[OzzieGeorge]

All that said, if you know anything about macros in for example excel then it is posible to write a macro to log on to the system and keep doing a trace on each trunk which will give you instantaneous connection details (which station each is connected to)!