Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MAINT TERMINAL

Status
Not open for further replies.

ERR5020

MIS
Oct 15, 2003
109
US
IM LOCKED OUT, WHAT TO DO?
 
how are you locked out ? if its dsbl use maint phone to enbl
if to many invalid pwd attempts wait until time expires.
 
Do you have a maintenance ntp or cd? Lookup access through the maintenance telephone.
 
set must be CLS=MTA. enter spree +91,enter ld space 37 return- (53#37##), enter enl space tty space x return
(365#889#x##).to log off enter ****
 
damned difficult to set-up or see if you have maint set if you can't login

is the system local, can you visit & access another tty, what system type

good insurance on remote sites to have mpre than 1 tty access
 
Press the manual INI key on the processor and initilize the swith (after hrs!!)
 
Are you locked out due to incorrectly entering your password 3 times? If so, then you have to wait for about 30 minutes before you can try again. Or do as roupe suggested above.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top