Hello,
after hours of trying to solve the problem with the help of Google /
Groups / Boards I finally ask here. I hope someone can help me on
this!
I've got Sendmail 8.14.4 on Centos 6.0. It's the standard RPM coming
with Centos / RHEL.
If I send an E-Mail without attachment - it's sent immediately.
Arriving within seconds at the receiver.
If I send an E-Mail with attachment – it takes about 1 hour to arrive
at the receiver … (it gets queued – but I don’t know why)
I’ve got excerpt of logs when this happens:
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Oct 10 09:01:41 xxx sendmail[9687]: p9A71f25009687: from=root,
size=2213187, class=0, nrcpts=1,
msgid=<201110100701.p9A71f25009...@xxx.at>, relay=root@localhost
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: assigned id
Oct 10 09:01:41 xxx sendmail[9688]: NOQUEUE: connect from
localhost [127.0.0.1]
Oct 10 09:01:41 xxx sendmail[9688]: AUTH: available mech=GSSAPI
DIGEST-MD5 PLAIN CRAM-MD5 ANONYMOUS LOGIN, allowed mech=EXTERNAL
GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: Milter: no
active filter
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: --- 220
xxx.at ESMTP Sendmail 8.14.4/8.14.4; Mon, 10 Oct 2011 09:01:41 +0200
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: <-- EHLO
xxx.at
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: --- 250-
xxx.at Hello localhost [127.0.0.1], pleased to meet you
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: --- 250-
ENHANCEDSTATUSCODES
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: --- 250-
PIPELINING
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: ---
250-8BITMIME
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: --- 250-
SIZE
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: --- 250-DSN
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: --- 250-
ETRN
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: --- 250-
AUTH GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: --- 250-
DELIVERBY
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: --- 250
HELP
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: <-- MAIL
From:<r...@xxx.at> SIZE=2213187 AUTH=r...@xxx.at
Oct 10 09:01:41 xxx sendmail[9688]: ruleset=trust_auth,
arg1=r...@xxx.at, relay=localhost [127.0.0.1], reject=550 5.7.1
<r...@xxx.at>... not authenticated
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: --- 250
2.1.0 <r...@xxx.at>... Sender ok
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: <-- RCPT
To:<y...@yyy.at>
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: --- 250
2.1.5 <y...@yyy.at>... Recipient ok
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: <-- DATA
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: --- 354
Enter mail, end with "." on a line by itself
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688:
from=<r...@xxx.at>, size=2213470, class=0, nrcpts=1,
msgid=<201110100701.p9A71f25009...@xxx.at>, proto=ESMTP,
daemon=Daemon0, relay=localhost [127.0.0.1]
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: --- 050
<y...@yyy.at>... queued
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688:
to=<y...@yyy.at>, delay=00:00:00, mailer=esmtp, pri=2243470,
stat=queued
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: queueup ./
qfp9A71fWa009688
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688:
dropenvelope, e_flags=0x4604042, OpMode=d, pid=9688
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: queueup ./
qfp9A71fWa009688
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: unlock
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: unlink ./
xfp9A71fWa009688
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: ./
xfp9A71fWa009688: unlink-fail 2
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: --- 250
2.0.0 p9A71fWa009688 Message accepted for delivery
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWb009688: assigned id
Oct 10 09:01:41 xxx sendmail[9687]: p9A71f25009687:
to=...@yyy.at, ctladdr=root (0/0), delay=00:00:00, xdelay=00:00:00,
mailer=relay, pri=2243187, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0,
stat=Sent (p9A71fWa009688 Message accepted for delivery)
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWb009688: <-- QUIT
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWb009688: --- 221
2.0.0 xxx.at closing connection
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWb009688: disconnect
level 1
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWb009688: in
background, pid=9688
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWb009688:
dropenvelope, e_flags=0x4001, OpMode=d, pid=9688
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWb009688: unlink ./
dfp9A71fWb009688
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWb009688: ./
dfp9A71fWb009688: unlink-fail 2
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWb009688: unlink ./
qfp9A71fWb009688
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWb009688: ./
qfp9A71fWb009688: unlink-fail 2
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWb009688: unlock
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWb009688: unlink ./
xfp9A71fWb009688
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWb009688: ./
xfp9A71fWb009688: unlink-fail 2
Oct 10 09:01:41 xxx sendmail[9688]: NOQUEUE: finis, pid=9688
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Only way to get sendmail to send it is to manually flush the queue (/
usr/sbin/sendmail -q) or wait one hour …
Hope someone can enlighten me on this!
Thank you, bye from Austria
Andreas
after hours of trying to solve the problem with the help of Google /
Groups / Boards I finally ask here. I hope someone can help me on
this!
I've got Sendmail 8.14.4 on Centos 6.0. It's the standard RPM coming
with Centos / RHEL.
If I send an E-Mail without attachment - it's sent immediately.
Arriving within seconds at the receiver.
If I send an E-Mail with attachment – it takes about 1 hour to arrive
at the receiver … (it gets queued – but I don’t know why)
I’ve got excerpt of logs when this happens:
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Oct 10 09:01:41 xxx sendmail[9687]: p9A71f25009687: from=root,
size=2213187, class=0, nrcpts=1,
msgid=<201110100701.p9A71f25009...@xxx.at>, relay=root@localhost
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: assigned id
Oct 10 09:01:41 xxx sendmail[9688]: NOQUEUE: connect from
localhost [127.0.0.1]
Oct 10 09:01:41 xxx sendmail[9688]: AUTH: available mech=GSSAPI
DIGEST-MD5 PLAIN CRAM-MD5 ANONYMOUS LOGIN, allowed mech=EXTERNAL
GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: Milter: no
active filter
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: --- 220
xxx.at ESMTP Sendmail 8.14.4/8.14.4; Mon, 10 Oct 2011 09:01:41 +0200
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: <-- EHLO
xxx.at
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: --- 250-
xxx.at Hello localhost [127.0.0.1], pleased to meet you
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: --- 250-
ENHANCEDSTATUSCODES
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: --- 250-
PIPELINING
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: ---
250-8BITMIME
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: --- 250-
SIZE
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: --- 250-DSN
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: --- 250-
ETRN
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: --- 250-
AUTH GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: --- 250-
DELIVERBY
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: --- 250
HELP
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: <-- MAIL
From:<r...@xxx.at> SIZE=2213187 AUTH=r...@xxx.at
Oct 10 09:01:41 xxx sendmail[9688]: ruleset=trust_auth,
arg1=r...@xxx.at, relay=localhost [127.0.0.1], reject=550 5.7.1
<r...@xxx.at>... not authenticated
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: --- 250
2.1.0 <r...@xxx.at>... Sender ok
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: <-- RCPT
To:<y...@yyy.at>
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: --- 250
2.1.5 <y...@yyy.at>... Recipient ok
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: <-- DATA
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: --- 354
Enter mail, end with "." on a line by itself
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688:
from=<r...@xxx.at>, size=2213470, class=0, nrcpts=1,
msgid=<201110100701.p9A71f25009...@xxx.at>, proto=ESMTP,
daemon=Daemon0, relay=localhost [127.0.0.1]
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: --- 050
<y...@yyy.at>... queued
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688:
to=<y...@yyy.at>, delay=00:00:00, mailer=esmtp, pri=2243470,
stat=queued
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: queueup ./
qfp9A71fWa009688
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688:
dropenvelope, e_flags=0x4604042, OpMode=d, pid=9688
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: queueup ./
qfp9A71fWa009688
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: unlock
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: unlink ./
xfp9A71fWa009688
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: ./
xfp9A71fWa009688: unlink-fail 2
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWa009688: --- 250
2.0.0 p9A71fWa009688 Message accepted for delivery
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWb009688: assigned id
Oct 10 09:01:41 xxx sendmail[9687]: p9A71f25009687:
to=...@yyy.at, ctladdr=root (0/0), delay=00:00:00, xdelay=00:00:00,
mailer=relay, pri=2243187, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0,
stat=Sent (p9A71fWa009688 Message accepted for delivery)
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWb009688: <-- QUIT
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWb009688: --- 221
2.0.0 xxx.at closing connection
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWb009688: disconnect
level 1
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWb009688: in
background, pid=9688
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWb009688:
dropenvelope, e_flags=0x4001, OpMode=d, pid=9688
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWb009688: unlink ./
dfp9A71fWb009688
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWb009688: ./
dfp9A71fWb009688: unlink-fail 2
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWb009688: unlink ./
qfp9A71fWb009688
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWb009688: ./
qfp9A71fWb009688: unlink-fail 2
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWb009688: unlock
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWb009688: unlink ./
xfp9A71fWb009688
Oct 10 09:01:41 xxx sendmail[9688]: p9A71fWb009688: ./
xfp9A71fWb009688: unlink-fail 2
Oct 10 09:01:41 xxx sendmail[9688]: NOQUEUE: finis, pid=9688
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Only way to get sendmail to send it is to manually flush the queue (/
usr/sbin/sendmail -q) or wait one hour …
Hope someone can enlighten me on this!
Thank you, bye from Austria
Andreas