Mailbox size or time limit for the messages

[mitelbr]

MXe III
MCD 6.0 SP2

Do you know if there is a time or size limit for the messages received in a mailbox?

I set an embedded voicemail system on a customer system and when we tested how much time a message reach we got a limit of 5min.

Can I set the time limit of the mailbox messages?

I searched in the help files and nothing about the limit.

I found in another thread that the limit is the harddrive size. If there is free space then we should be able to leave long messages.

Here is the status of the harddrive.

-> dosFsShow "/vmail"
dosFsShow "/vmail"

volume descriptor ptr (pVolDesc): 0x1cf192f8
cache block I/O descriptor ptr (cbio): 0x1d36f440
auto disk check on mount: DOS_CHK_REPAIR |DOS_CHK_VERB_1
volume write mode: copyback (CBIO_WRITE)
max # of simultaneously open files: 302
file descriptors in use: 8
# of different files in use: 8
# of descriptors for deleted files: 0
# of obsolete descriptors: 0

current volume configuration:
- volume label: /vmail ; (in boot sector: )
- volume Id: 0x2c30000
- total number of sectors: 29,527,848
- bytes per sector: 512
- # of sectors per cluster: 8
- # of reserved sectors: 32
- FAT entry size: FAT32
- # of sectors per FAT copy: 28,836
- # of FAT table copies: 2
- # of hidden sectors: 0
- first cluster is in sector # 57,704
- Update last access date for open-read-close = FALSE
- directory structure: VFAT
- file name format: 8-bit (extended-ASCII)
- root dir start cluster: 2

FAT handler information:
------------------------
- allocation group size: 369 clusters
- free space on volume: 14,608,232,440 bytes
value = 0 = 0x0
->

Hope you can help me.

 

[sarond]

There is no way to change the limit on message lengths with embedded VM.
As you have found the limit is 5 minutes.

Call Recording is not limited by the same time.

 

[mitelbr]

Thank you, sarond.

Can I set call recording to do the same thing as the embedded vm?

I need to set a mailbox number to receive calls and after the beep people leave messages and then those messages are sent to an e-mail.

Can I do that with call recording with 2 vm licenses?

Thanks for your help.

 

[mitelbr]

Today the system is working with a voicemail mailbox receiving and forwarding messages to an e-mail.

When people call the mailbox they need to listen an announce before leaving a message and I need to know if record-a-call is capable to do that like voicemail and if I can do that with only 2 voicemail licenses.

Thanks a lot.

 

[Billz66]

Rocerd a call works via manual button pressing or automatically by changing the cos of the user

it only works on trunk calls ( not ext-ext) and will not play an announcement to the person being recorded

If I never did anything I'd never done before , I'd never do anything.....

and due to an endless stream of MiCollab , MiCC issues
Life would be simpler If only they tested products properly before releasing them .....