We are talking to a customer who has 2 sites, Magix 1.5 in one and Magix 2.0 in the second - they are networked with a point to point T1 that i believe is being used for both voice and data between the sites (cisco 11720's at each site). Each system has 3 or 4 analog lines into 412 TDL cards and i am assuming that they are getting additional circuits off a second T1 at one of the sites. I am trying to figure out how that is configured and was hoping to get some insight as to what i need to look for to determin exactly how they are configured. I know this description is somewhat limited so please tell me what other info i need to provide to help you guys answer my questions. Ultimate goal is to remove Magix and go to IP system due to some functionality issues but i need to know how they are configured before i quote the upgrade. Thanks!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Magix to Magix Networking Questions
- Thread starter upstateny
- Start date
Furball8675309
Vendor
Pull prints of the ARS tables. the T1 and the trunks information
Don't forget the UDP tables and the PRI as well.
I think that's where you'll find the most useful info, if they are tied with PRI.
I have a 5 location Magix network site I am working on that's been up for a while, and it uses PRI.
Works quite well....
I think that's where you'll find the most useful info, if they are tied with PRI.
I have a 5 location Magix network site I am working on that's been up for a while, and it uses PRI.
Works quite well....
- Status
Similar threads
- Locked
- Question