magix paging

[telecomguyia]

I am trying to program loudspeaker paging on some phones, I have the button programmed, but thry still need to dial a 0 to get to all page.. is there anyway to program the 0 as well. Any help would be great!
thanks

 

[TouchToneTommy]

You must have a zone page adapter, which requires a digit for a zone, or a 0 for all zones. You can't normally automate the DTMF digit, but try this.

Put the paging line in a pool, give an extension Pool Dial-Out access to that pool, and program a button for the pool number, pause, and 0. I don't know if it will work. I'm not sure you can put a line administered as a Loudspeaker Paging line into a pool, in the past I have seen SC's set up a pool code for paging, but don't know the status of the line used for paging.