Magix networked to IPO 1

[Telecomboy]

The Job Aid says to program the Magix as a T1, does anyone know if it can be programmed as a PRI in this situation. I would rather not have to dial a pool access code to reach the IP Office. If it's set as a PRI, I can configure the UDP table, has anyone set this up? Thanks in advance.

 

[1043]

http://support.avaya.com/elmodocs2/ip_office/tech/Global_IP_Office_Technical_Tip_134.pdf

Try this

 

[Telecomboy]

Thanks! That is exactly what I was looking for!

 

[kwing112000]

i have done it as a PRI and it has worked well. let me know if you need anything

 

[telecomgear]

The technical tip that 1043 directed you to references an old techncal tip that I used a few years ago that included the programming that you need to do on the magix side. This new tip does not have that info. I searched for it at the avaya support site but couldn't find it. I may of found in on the documentation cd that came with the ip office, just in case ya need to know.

To Us and Those Like Us, Damn Few Left