Magix DNIS Routing 1

[dgillson]

Carrier is sending last 7 digits on a standard T1
( Not PRI). I need to delete 7 digits and add 3
Example: 587-4422 needs to route to 300

1 - Can I use the PRI routing table for a statndard T1

2- It looks like I can only translate 16 diffrent patterns butI have 27 unique 7 digit numbers coming in, each one goes to a diffrent extension number.

 

[eltorodeoro]

no, you can't use the PRI table for a wink/wink trunk. just tell your provider what 4 digits you need for each number. if they don't accomodate, someone else will.

 

[eltorodeoro]

sorry. 3 digits.

 

[dgillson]

Is it possible to any DNIS conversions on the Legend for a standard wink/wink T1 ?

I see something in the Doc's about S56 where I can globally delete digits and add on the span but it refers to only to data extensions

 

[eltorodeoro]

i can't remember. even if you can, i think it would be a sweeping modification, like with DIDs. like delete 1 digit, insert a 3. but that would apply to all calls. probably not what you're looking for.

can you not accomplish what you need to with calling groups and/or adjuncts?

 

[merlinman]

With E&M Tie Lines (the Wink/Wink you mention)your dial plan MUST MATCH what they send.

No massaging allowed.

 

[dgillson]

Ok, so it looks like I'll need to have the carrier convert the existing T1 to PRI - they claim they can't provide custom DNIS digits.

Is the Magix National or ATT Custom ?

I have also heard there are issues taking an existing Legend DS1 card from T1 to PRI - any truth to that ?

 

[dizzyphil]

Magix is ATT custom. I've personally never had problems with the T1 to PRI.

Dizzy