Magix CPN with ISDN-PRI

[wannabe1]

We have installed a Merlin Magix with a ISDN-PRI. We would like to send the station DID as calling party number. I can send a fixed number on a per channel basis and change it at will. When I change the number to send to "base number plus extension", the number being sent is stripped, in the middle. The CO has shued in and set up a trap to collect the info for us.
Our base number is 6087654 and the extension range is 300-399. So if I am at ext. 321, the number sent should be 6087654321. The PBX sends 6087321 stripping 3 digits in the middle. Anybody ever encounter this or know of a resolution.

 

[DrPbx]

Put your entire 10 digit main number into the base number setting.

 

[dagwoodsystems]

DrPbx has the answer.

Tim Alberstein

http://www.dagwoodsystems.com

 

[wannabe1]

I will give it a try, thank you

 

[wannabe1]

Problem Solved

Thanx Again