Magix 3.0 Spontaneous Ringing

[ve3slw]

On trunk 803 of a 412 TDL card, the line will ring briefly without an outside caller actually calling the CO lines.

No matter which CO I plug into trunk 803 it does this.
No other trunk behaves this way.

Any suggestions.

 

[merlinman]

The port may be going bad.

See if your error log shows anything.

 

[1043]

You can try a busyout restore but I've seen this before, It's most likely a bad port.You can also swap lines 802 and 803 and see if the problem stays with 803 or goes with 802.

 

[TouchToneTommy]

You will probably see "stuck ringing" in the error log. It's time to replace the board.