Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Magix 100DCD Configuration

Status
Not open for further replies.
Sep 29, 2002
524
US
Can any one tell me how to configure a PRI all voice configuration using the 100DCD module? I have configured the PRI ESF B8ZS TEI=0 and switch type to 5ESS and rest of configuration needed for a normal 100D module. However, I am having problems configuring the CSU/DSU part. I am having trouble assigning the D and the rest of the channels. Any tips?


Gladys Rodriguez
GlobalStrata Solutions
 
As with the CSU/DSU, you assign all the channels to either by: Lines/trunks-->more-->more-->CSU/DSU, and just assign the channels. You can inspect it to see what is assigned to what.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top