Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Machine problem.. Help

Status
Not open for further replies.

kenny64

MIS
Apr 20, 2004
7
0
0
NO
Hi..

i have an problem..
when i stomp my foot a bit from my computer my screen goes black :(

i have:
Thermaltake Lanfire
Thermaltake psu 360w
Amd xp 2600
768 mb ddr ram
sapphire radeon 9800 pro ultimate edition

if someone have experienced this problem or know ehat it is please help me..
 
Hi, I have a solution - don't stomp you foot there ;-)

But seriously you will have a dodgy connection somewhere possibly between your pc and monitor.
Does the screen come back on?
Has the PC crashed at this point?
 
the stomping were only an example..

nope the screen does not come back on..
i think the pc is still running, it's just that i don't see anything
 
1-Try Checking Monitor Cable
2- Open the case and make sure if the video card is not loose.
3.Check power supply connections.

Good Luck :)
 
Indeed, almost certainly a loose cable or a loose component in the Montitor/Computer.

Do not however check inside the monitor, just rule everything else out first.
 
Monitor power indicator still on?
You could go to command line before you stomp, then see if you have disk lite when you run a directory listing. Would cut the possibilities down.

Ed Fair
Give the wrong symptoms, get the wrong solutions.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top