This is what led to my urlmon.dll corruption. When my machine is on, no matter what I move/wiggle in the back of the machine: monitor connection, speaker connection, wi-fi card antenna, the machine powers off. I figure maybe a screw or something on or under the mb. Any suggestions.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Machine keeps shutting down when something in back is moved.
- Thread starter kambui
- Start date
I've seen power cords do this.
Although a loose screw under the M/B can create the problem it generally requires more than a cable wiggle to cause them to move as they tend to wedge in place.
Ed Fair
Give the wrong symptoms, get the wrong solutions.
Although a loose screw under the M/B can create the problem it generally requires more than a cable wiggle to cause them to move as they tend to wedge in place.
Ed Fair
Give the wrong symptoms, get the wrong solutions.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question