Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Machine cannot ping itself

Status
Not open for further replies.

jimktrains

IS-IT--Management
Jan 19, 2007
50
US
We have a customer with SCO unix 5.0.5 that cannot ping itself using the ip address or name. It can ping localhost and users are connected to it via telnet. I can ping the users that are connected and they say they can ping the server from other machines. When I ping it's ip address, it just comes back with "Host is down."

I am not sure what could be the problem as I was there a few weeks ago and I didn't notice a problem.

Any help is much appreciated.

 
Not sure where to start here.

Please post the output of these commands:
# ifconfig -a
# netstat -rn
# cat /etc/resolv.conf
# hostname

Also note any entries in /etc/hosts which have the same IP and/or hostname.

"Proof that there is intelligent life in Oregon. Well, Life anyway.
 
# ifconfig -a
net0: flags=4043<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.2.2 netmask ffffff00 broadcast 192.168.2.255
perf. params: recv size: 24576; send size: 24576; full-size frames: 1
ether 00:02:a5:93:06:b1
lo0: flags=4049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 8232
inet 127.0.0.1 netmask ff000000
perf. params: recv size: 57344; send size: 57344; full-size frames: 1
atl0: flags=404a<BROADCAST,LOOPBACK,RUNNING,MULTICAST> mtu 8232
inet 0.0.0.0 netmask ff000000
perf. params: recv size: 4096; send size: 8192; full-size frames: 1

# netstat -rn
Routing tables
Destination Gateway Flags Refs Use Interface
default 192.168.2.254 UGS 13 4289 net0
127.0.0.1 127.0.0.1 UH 2 24 lo0
192.168.2 192.168.2.2 UC 1 0 net0
224 192.168.2.2 UCS 0 0 net0

# cat /etc/resolv.conf
nameserver 192.168.2.3

# hostname
humsrv.xit

All entries in /etc/hosts have different IPs.
 
/etc/hosts should have an IP address followed by machine name.

Like this
192.168.2.2 humsrv humsrv.xit

Are you using DNS for resolution? Who is controling DNS entries?
 
Also the resolv.conf should have an entry of search order;
hostresorder local bind

Are you running a firwall on this server?
 
I agree with pknoz, you should have a 192.168.2.2 entry in your /etc/hosts file.
You can try renaming "/etc/resolv.conf" to temporarily disable that function.

# mv /etc/resolv.conf /etc/resolv.save

See if that changes your symptoms.
Shouldn't the "hostname" return more? I don't know if it's absolutely required, but I expected something like:
humsrv.xit.com (something with 3 values instead of 2).



"Proof that there is intelligent life in Oregon. Well, Life anyway.
 
192.168.2.2 humsrv humsrv.xit is in the /etc/hosts file.

I renamed resolv.conf and no change in the results.

DNS is not used for naming and there is no firewall on this server that I am aware of.

It owuld show humsrv.xit.com if xit.com was the domain name but it is not.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top