M7310 showing 34 buttons to program instead of just 24

[lvNortel]

Using the ICS Programing Tool instead of using a set for programing. I have noticed that some not all of the 7310s show 34 buttons instead of 24. The hardware does show it is a 7310. Any reason why it is showing more buttons to program than it should. It is hard to program with it being like this. I have tried to disable that port then reenable it but it still says 34 buttons.

"A phone is a phone and not a computer workstation".

 

[lvNortel]

BTW I program via a RAD and the NRU 10. program.

Thanks

"A phone is a phone and not a computer workstation".

 

[exsmogger]

You might upgrade to NRU 11.

Brian Cox
Georgia Telephone

http://Georgia-Telephone.com

http://www.linkedin.com/in/briancox1952

 

[silver987]

The 12 buttons on the top are dual buttons, there is a bottom and a shift up.

Wayne T

 

[exsmogger]

Right, Wayne. I forgot about that.

Brian Cox
Georgia Telephone

http://Georgia-Telephone.com

http://www.linkedin.com/in/briancox1952

 

[allworxguy]

Newer revs show 34. 24 on top (shifted) and the 10 with indicators.

Marv ccna

http://www.telemarv.ca

 

[lvNortel]

yes I forgot all about that as well. Thanks

"A phone is a phone and not a computer workstation".