M7310 or T7316

[totaletech]

I am programming a CICS KSU with 6.1 software.
Im using NRU through a RAD to program the system.

Here is my issue.

I program DN 222 for a T7316 set, which is what will be punched down to that port. I then plug a T7316 set into the port and the system sees it as a M7310 and dfaults all my button programming back to defaults for that 7310 handset.

This is really wierd!!!

 

[dsweet]

I've notice this on All releases. From what I've seem this is normal as all T7316 default out with a M7310 button layout.

 

[lowradiation]

I believe it has to be a T7316e (the 'e' is for enhanced) for the 6.1 software to recognize the phone as a 7316.
The older T7316 will still emulate a M7310.