M3904 phones on Release 25

[id07355]

Can anyone verify the M3904 phones will work on an Option11 running Release 25 version 2111 Issue 10?

Please advise, I am looking to get rid of my 2008s and 2616 and replace them all with 3904s.

Thank you.

id07355

 

[johnpoole]

they do work at my site.. i have a remote switch (opt 11) that uses just 3904's

john poole
bellsouth business
columbia,sc

 

[coniglio]

if you're on 25.10 I'm not sure if they will work. You may need to be on 25.40. simple way to see is try building one. Under type put 3904 and see what happens.

 

[id07355]

I understand that the best way to test it is to do it but the site i'm concerned about is in WA state, i'm in ND

Guess i'll just have to ship one out and try it. Thanks for the info everyone.

-c-

 

[hawks]

Phase 1 Phones RLS 24.24
Phase 2 Phones RLS 25.10 (will also run phase 1)
Phase 3 Phones RLS 25.40 (will also run phase 1 & 2)

RLS 25.08 will run Phase 2 but only at Phase 1 level
RLS 25.10 - 25.30 will run Phase 3 but only at Phase 2 level
At least that is the information that I have.

 

[coniglio]

It looks like you're in luck. But I noticed you said you were going to ship one out and see what happens. Who's going to build them if you're not doing it remotely?