-
1
- #1
Hi,
Just worked through a quick issue and thought I should post it as I was unable to find any discussion of it.
The issue was SDL2110 REASON 18 in ld32 after trying to FDLF or FDLU a m3904 set.
In short - I had to disconnect the add-on module that was attached to the phone first. I was then able to FDLF successfully.
Hope this saves someone some time!
Just worked through a quick issue and thought I should post it as I was unable to find any discussion of it.
The issue was SDL2110 REASON 18 in ld32 after trying to FDLF or FDLU a m3904 set.
In short - I had to disconnect the add-on module that was attached to the phone first. I was then able to FDLF successfully.
Hope this saves someone some time!