M3903 WALL PHONE

[eartel]

DOES THE M3903 HAVE A WALL BRACKET?

EARTEL
888 416 4327
310 549 0387 Fax
rluna@eartel.net

 

[PERRYPJ]

YUP ALL THE 3900 SERIES HAVE WALL BRACKETS

OLD ROLMEN WORKING ON NORTELS

 

[pdulfo]

excuse my ignorance, but where? I have never seen one.

 

[jimeec]

I believe that the desk top footstand that comes standard with the phone can be flipped around to mount on the wall.I installed a few here when they first came out and if I remember correctly it drove me nuts trying to swap it.I could be wrong though it was a while ago.

 

[hawks]

The 3901 & 3902 have built in wall mount brackets the rest you need to order a wall mount bracket for them.

 

[hawks]

Sorry here you go
To wall mount the telephone
The telephone wall mount bracket kit contains a one piece wall mount plate
to attach the telephone to the wall.
To wall mount the telephone:

1 Place the wall mount bracket against the wall and mark the spot to
insert the screws.
Note: M3901 and M3902 have built-in wall mount brackets.

2 Screw the five screws in and leave about 3 1/2 mm (1/8 inch) between
the head of the screw and the wall.

3 Remove the footstand from the telephone by sliding the footstand
down (using the plastic hinges) about 7 mm (1/4 inch).

4 Swing the footstand away from the telephone base and remove from
the telephone.

5 Attach the wall mount bracket onto the back of the telephone by
placing the telephone at the top edge of the wall mount bracket and
sliding the telephone into place.

6 Mount the wall mount bracket, attached to the telephone onto the
screws located on the wall.

 

[jimeec]

I just looked and mine are the 3902's with the bracket included.--Thanks for the mounting instructions for the others though

 

[eartel]

THANKS FOR THE ASSIST. I FOUUND THAT EHE M3903 AND M3904 ARE SHIPPED WITH A STANDARD DESK FOOTSTAND. THE WALL MOUNT KIT IS ORDERED SEPERATELY. THE PART NUMBER IS NTMN15AA.

EARTEL
888 416 4327
310 549 0387 Fax
rluna@eartel.net