Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
M2250 & DSS 9000 1
- Thread starter eartel
- Start date
-
1
- #2
There is a seperate manual for this unit. I ran into this myself. It;s the same power pairs that are listed in the M2250 install chapter in the system install books.
It's power supply connects to the y-bl and y-or pairs. You have to make sure the power supply is within 120ft of the console though.
It's power supply connects to the y-bl and y-or pairs. You have to make sure the power supply is within 120ft of the console though.
- Thread starter
- #3
24 dc at one amp, and the distance is not as bad as the bood says, a power tn will work up to 300 ft on a cat 5 using all 8 cond. the hard part is finding the right level in the programing (from the console) to turn it on in about 4 places. like atascomman, i don't have one on this site.
john poole
bellsouth business
columbia,sc
john poole
bellsouth business
columbia,sc
- Status
Similar threads
- Locked
- Question