Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

m2250 console blf /cgm

Status
Not open for further replies.

eartel

Vendor
Mar 10, 2003
214
US
Does anyone know the wiring for the external 16v power supply for the m2250 console blf /cgm module?

EARTEL
888 416 4327
310 549 0387 Fax
rluna@eartel.net
 
It connects to the YL-BL and YL-OR pairs of the console cable. It also had to be less than 120ft from the console if I remember correctly.
 
Thanks for the tip. I have been trying to program the blf from the console. It shows the main menu and allows me to access the menu items, but when I try to program the start and end extension it does not take.

I went to ld 15 and changed the att and ftr options and went to ld 12 to change to enhanced blf. It still does not work. Is there anything else that needs to be changed?







EARTEL
888 416 4327
310 549 0387 Fax
rluna@eartel.net
 
Let me ask the guys at work tomorrow and I will post back then.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top