M1 QSIG to MD110

[CSKEngineer]

Hi,

I have a Succession Rls3.0 (opt11c/ssc)connected to a Ericsson Md110 via qsig (isgf, iso qsig).
Basic call functionality is working fine.
The problem we have is when we try and forward a phone on the md110 to a DN on the opt11, it won't work.
It will work the other way opt11 to md110.
From the Dch messaging i can see the md110 send in a setup request with the numbers of the parties invlolved, it doesn't seem to like the response from the opt11c.

I have looked through other posting and my opt11c config is similar.
I'm wondering if any body has a copy of the MD110 config for ISO qsig to Nortel?
(I have posted a similar message to the md110 group.)

Thanks in advance.

 

[johnpoole]

maybe in a Ericsson forum, i haven't seen that switch in years. might help to mark the loop from the nortel as local. something i usually try if i can call but not forward. if it's not a cfxa or ncos problem, maybe telling the switch it's local will help

john poole
bellsouth business
columbia,sc